FFA1000-100 (FFA1000-200)

Application Statement:
Designed to remove toxic chemical and biological warfare agents in gaseous (vapor) and aerosol (particulate) forms from the air stream, while providing toxic free environment to personnel or equipment by creating positive pressure in the toxic free area (TFA).

Features:

• 1000-cfm airflow with manual flow control
• High airflow for permanent installation or large transportable shelters
• All-weather, stackable, modular design
• Uses standard 200-cfm filter sets NSN 4240-01-369-6533 (5 per system)

The -100 version consists of a motor/fan assembly, a filter housing with five 200-cfm gas and particulate filter sets, and a frame assembly, making the system self-supported and easily transportable. Its rated airflow of 1000-cfm may be adjusted by means of a manual flow control valve located on the blower inlet. Multiple units can be stacked and nested to create large air supply unit with multiple air sources.

The -200 version includes the filter housing and hosing support only - making it a modular unit that can be stacked and nested to created large capacity filtration unit See Figure A). The nested assembly can then be supplied with air from a single source. The small size and lightweight of the FFA1000-200 allows for easy maneuverability by two people and can be carried into a building and through standard (36") doors. These features allow the installation of a large capacity system without the use of cranes or special equipment. The skidless and frameless construction allows the FFA1000-200 to be configured in various ways. For example two housings could be connected by the outlet (making one outlet an actual inlet - see Figure B) and configure the system as per the CHEM-DEMIL standards reverse redundant filters (HEPA-GAS-GAS-HEPA) increasing total residence time to near 0.4 seconds.

The FFA1000 and it variations have been implemented into various government buildings military and civilian facilities in the USA and around the world.

Contact Hunter Manufacturing for further information on the FFA1000, 200-cfm filter set or any of our CBRN collective protection products.

FFA1000-100 Specifications PDF Datasheet
Hunter Part Number	FFA1000-100
National Stock No.	4230-01-485-6184
Military Specification	N/A
Rated Air Flow	1000 cfm, 1700 m3/h
Air flow resistance:	6.5 in H2O, 1617 Pa
System pressure performance	9.0 IWG, 2241 Pa
Physical Characteristics: Length Height Width Weight	83" (2,108.20 mm) 35.38" (898.65 mm) 27.56" (700.00 mm) 330 lbs. (150 Kg)
Housing material	Aluminum
Filter	Gas and Particulate, Filter Set, 200-cfm part no. 5-19-6722-N NSN 4240-01-369-6533 - 5 sets.
Power Requirements Hz VAC Amp HP	60 190-230 Standard 380-460 (special order of field modified) 8.8-7.2 4.4-3.6 3.0

FFA1000-200 Specifications
Hunter Part Number	FFA1000-200
National Stock No.	4230-01-485-6183
Military Specification	N/A
Rated Air Flow	1000 cfm, 1700 m3/h
Air flow resistance:	6.5 in H2O, 1617 Pa
System pressure performance	(depending on customer supplied equipment)
Physical Characteristics: Length Height Width	58.85" 1,494.80 mm 26.76" 679.70 mm 26.97" 685.00 mm
Housing material	Aluminum
Filter	Gas and Particulate, Filter Set, 200-cfm part no. 5-19-6722-N NSN 4240-01-369-6533 - 5 sets.