|
HF200S Filter Set, Gas and Particulate, 200-cfm
200-cfm CBRN Filter Set
Application Statement:
Removes toxic chemical and biological warfare agents in gaseous (vapor) and aerosol (particulate) forms from the air stream.
Features:
- 200-cfm rated airflow
- ASZM-TEDA carbon
- Radial configuration
- Horizontal and vertical installation
- Modular configurations allow for multiple filters installation
General Product Description: The HF200S, 200-cfm CBRN filter set is the civilian equivalent to the US Army/Navy M98 (M56**).
The HF200S removes toxic gases and particulates to provide purified air for a variety of applications, including mobile shelters, vehicles and ship borne collective protection systems. While the HF200S filter set is ideal for all medium airflow requirements, it can be applied to higher airflow applications such as building protection.
Multiple HF200S filter sets can be combined to create 400-cfm and up to 1400-cfm on a single transportable filter units, and multiples of these units can be employed to accommodate even larger airflow requirements. For example, the US Navy's Collective Protection System (CPS) uses as many as 200, M98 filter sets (the military equivalent to the HF200S) per ship. The HF200S filter sets are used on the military M84, M95 and M96 filtration systems as well as Hunter's FFA series of collective protection systems and MCRF housings used by the US Air Force and Army for building protection and other transportable shelters. The M28 system used in CPDEPMEDS and other applications utilizes a version of this filter incased in a hermitically sealed canister (HSFC). Hunter's HF200S filter sets are designed and tested to provide protection from all known chemical and biological agents. Contact Hunter Manufacturing to determine how the HF200S filter sets can be configured and applied to meet your chemical and biological protection needs.
HF200S Filter Set, Gas and Particulate, 200-cfm Specifications
PDF Datasheet |
| Hunter Part Number |
5-19-6722-N |
| National Stock No. |
4240-01-369-6533 |
| Rated Air Flow |
200 cfm, 340 m3/h |
| Air flow resistance: |
See individual component filter |
| System pressure performance |
9.0 IWG, 2241 Pa |
Physical Characteristics:
Gas filter:
Length
Inside dia.
Outside dia.
Weight
Particulate filter:
Length
Inside dia.
Outside dia.
Weight
|
10.20" (10.81" with gaskets fully expended) 16.69" 21.43"
35.5 lbs. (approximately)
10" 12" 16.6"
7.75 lbs. |
| Housing material |
Gas filter - Aluminum; Particulate - Stainless Steel/Aluminum |
Filter Element:
Gas filter:
Airflow resistance
Carbon type
Carbon density
Particulate filter:
Airflow resistance
Particle efficiency
Gas/Particulate filter: DMMP CT value (minimum - new) CK CT value (minimum - new)
|
4.5 IWG 1119 Pa (maximum new)
12 x 30 ASZM-TEDA
0.65 g/ml (approximately)
1.0 IWG 498 Pa (maximum new)
99.97% (@0.3 micron and rated flow)
300,000 mg x min / m3
110,000 mg x min / m3 |
* Weight may vary slightly due to carbon density and certain other factors.
** M56 - For many years the filter was wrongly referred to, as the M56 filter after its original program affiliation. The nomenclature used in this catalog sheet reflects the official government designation and nomenclature.
|