NATO Charging System
 Space Heating Equipment
NSN: 4520-01-533-0607
Type of Service :
Information on additional authorized item for Space Heater Convective
Instructions/Service:
All Space Heater Convectives (SHC) come with a charging adapter that must be attached to a 12VDC battery charger which are powered by 120VAC. As an additional authorized item, the NATO Charging System (NCS) can be attached directly to any 24VDC NATO slave recepticle. The modular NATO connector is very small and light. The contents fit into a small transport bag which fits easily into the accessories bag for the SHC. The battery connector fits directly on to the SHC battery connector. The NCS is a complete charging system not just a jumper cable. When attached to the battery and DC power a small LED blinks and indicates that the battery is charging. The LED stops blinking and stays illuminated when the battery is fully charged. It cannot be hooked up incorrectly and will not drain the vehicle battery below 18VDC.
PDF Datasheet
Other features include:
| Input Voltage |
20 - 33 VDC |
| Minimum Turn On Input Voltage |
22.6 VDC |
| Ruggedized ABS Housing |
Withstands tough environments |
| Input Power Limit |
Protects the charger if there is an output short circuit during power up. |
| Low Voltage Cut Off |
This protection shuts down the adapter until the input voltage returns to the proper operating range. |
| Input Over Voltage Cut Off |
This feature protects the charger. |
| Input and Output EMI Filters |
To prevent Electro Magnetic Interference |
|
