|
F100-60K
 60,000 BTU Air Conditioning/Heating — Commercial Environmental Control Unit
Application Statement
Portable, lightweight and versatile in design, Hunter's F100-60K, commercially available Environmental Control Unit, produces 60,000 BTU/hr. of cooled or heated air to the inside of larger military tents or shelters.
Features:
- 60,000 BTU/Hour cooling at an outside ambient temperature of 125°F
- Energy-efficient, Copeland Scroll™ Compressor
- R-410A high-efficiency refrigerant system
- 10 KW electric heater
- Lightweight design, 500 lbs. (200 lbs. lighter than competitive systems)
- Low power consumption
- Low noise level, 75 dBA
General Product Description:
The F100-60K Environmental Control Unit incorporates industry-leading technologies from two of Hunter Defense Technologies' business units, Hunter Manufacturing and PowerSystems International. Hunter Manufacturing is a world leader in the design and manufacturing of military environmental equipment which has been combined with the proven air conditioning technology developed by PowerSystems International resulting in the F100-60K, a commercially available ECU.
The F100-60K is specifically designed for operation in severe environments where rough handling, sand, dust, rain, snow and extreme heat are encountered. The F100-60K delivers 60,000 BTU/hr. of conditioned air to military personnel, and has the capability of providing heat when required. The unit is designed to be used outside of a tent or shelter. It can either be positioned on the ground or mounted on a trailer for increased portability. The F100-60K connects to the tent or structure with flexible ducts attached to both the inlet and outlet of the evaporator.
The unit has two 16-inch diameter, 6-foot long inlet and outlet airflow ducts that are attached to either side of the control panel. Both ducts are constructed with a nonpermeable, coated outer material with a 6-inch helical stiffener pitch. The duct material is designed to remain flexible during operation in temperatures ranging from -50°F to 125°F. Both the inlet and outlet ducts are stored on board and designed for easy set-up during cold operation.
The F100-60K incorporates a 25-foot power cable and a 15-foot condensate drain hose.
Contact Hunter Manufacturing for more information on the F100-60K System or any other products. Ask how the F100-60K can service your heating needs.
F100-60K Specifications
PDF Datasheet |
| Cooling capacity |
With air entering the evaporator @ 90°F (32°C) dry bulb/ 75°F (23.8°C) wet bulb,
125°F (51.6°C) dry bulb outside ambient |
60,000 Btu/hr Total Sensible/Latent (19.33kW) Total Sensible/Latent |
| Heating capacity (optional) |
|
10kW ( 34,140 Btu/hr) |
Air Flow:
Evaporator with supply-air and return-air ducts installed
|
|
2,000 SCFM @ 1.00" WC External
3398 m3h @ 25mm WC External
|
Air flow:
|
|
6,000 SCFM (10,195 m3h ) |
| Sound Power |
1m from condenser fan outlet. |
< 76 dbA @ 1m |
| Operating temperature range: |
Cooling
Heating |
40° to >125°F (4.4° to >51.6°C)
-50° to +70°F (-45° to + 21°C)
|
| Storage temperature: |
|
-60° to +160°F (-51° to +71°C) |
| Physical characteristics: |
Frame |
Aluminum, corrosion resistant, riveted, space frame structural design. |
|
Weight |
550lbs (249kg)
With: Supply-air & Return-air Ducts,
25' (7.6m) Power Cord, 15' (4.5) Drain Hose.
|
|
Supply-air and return-air ducts |
Qty. (2) 16" (406mm) Diameter x 6' (1.82m) Long, Color: Desert Tan.
(Transport Storage located inside the ECU)
|
|
Evaporator Blower Wheel |
Backward Incline Impeller, Sea Water & Vibration Resistant Welded Aluminum impeller. Taper-Lock Hub Bushing. |
|
Evaporator blower motor |
2hp, Motor, NEMA 56 Frame, TEFC, 4 Pole, Wash down Duty, 65°C Amb. |
|
Condenser fan type |
Motorized, Axial Fan, Advanced Low Noise Die Cast Aluminum Blades, Motor IP 54 Enclosure, 70°C Amb, 2 speed for low ambient operation, Sea water, hot climate protection, Transit Duty maintenance free sealed ball bearing, fully guarded, transit duty construction. |
|
Compressor |
Copeland Scroll™ Compressor |
|
Evaporator coil |
Fin-Tube Design- .006" Thk. Aluminum Fins, 3/8 CU Tubes, Corrosion Coated Satin Black Dip. |
|
Condenser coil |
Micro-channel Design: Lightweight all Aluminum Construction, extra large face area to assure reliable operation during high ambient operations, Wide Fins per inch fin spacing allowing sand, dust and organic materials to pass through the coil.
(Optional: Baked-on Epoxy-E Coat finish for Corrosion Protection)
|
|
Refrigerant |
HFC-410A, (Optional HFC-407C) |
|
Refrigerant charge |
5lbs. (2.26kg) |
| Electrical Characteristics: |
Voltage
|
208VAC , +10%/-5% |
|
Phase |
3 |
|
Frequency |
50/60 Hz |
|
A/C Current |
45 Amps |
|
Heat Current |
35 Amps |
|
Main circuit breaker |
60A |
|
Control circuit breaker |
1A |
|
Power cable and connector |
25' (7.6m) Long, 5 Wire, With connector MS90556C32412P
(Transport Storage Located inside ECU)
|
|
